Replacement Parts And Accessories - Shure UHF-R Wireless User Manual

Replacement Parts and Accessories

Furnished Accessories
Microphone Stand Adapter (UR2)
Zipper Bag (UR1)
Zipper Bag (UR2)
Antenna Extension Cables (2)
Hardware Kit, Locking Connector
Antenna (UR1), 518-578 MHz
Antenna (UR1), 578-698 MHz
Antenna (UR1), 740-865 MHz
Two Antennas (UR4), Band
Dependent (see table)
Transmitter Carrying Case
Optional Accessories
SM58 Head with Grille
SM86 Head with Grille
BETA 58 Head with Grille
BETA 87A Head with Grille
BETA 87C Head with Grille
SM87A Head with Grille
KSM9/SL Head with Grille
KSM9/BK Head with Grille
Matte Silver Grille (SM58)
Matte Silver Grille (SM86)
Matte Silver Grille (BETA 58)
Black Grille (SM87)
Matte Silver Grille (BETA 87A)
Matte Silver Grille (BETA 87C)
Black Grille (BETA 58)
Black Grille (BETA 87A/BETA 87C)
Popper Stopper Windscreen
Belt Clip
Body-Pack Pouch (Black), UR1
Body-Pack Pouch (White), UR1
Architects' and Engineers' Specifications
The wireless system shall operate in the UHF band between 518 MHz and 865 MHz, with the specific range being dependent on the
user's locale. The system shall include the option of changing the operating frequency in order to avoid RF interference, enabling up
to 108 systems to operate simultaneously in the same location. Preconfigured group, channel and frequency setups shall be available
to ensure that multiple systems in use do not interfere with one another.
All transmitters shall be powered by 2 AA batteries and shall have a power on/off switch. The bodypack will have an LED indicating
that power is on. Available transmitters shall include: a body pack for use with electric guitars, basses, and other electric instruments,
and a handheld microphone for vocals. The transmitters shall have a DC/DC converter to ensure consistent performance, even if bat-
tery voltages change.
The receiver shall have a user-programmable, menu-driven LCD showing group, channel, frequency, name, squelch level, and
locked/unlocked status. The system shall use technology such as MARCAD signal combining circuitry to improve reception, minimize
signal dropouts, and achieve the best possible signal-to-noise ratio. An equalizer, tone key squelch, and noise squelch circuitry shall
be built into the system to provide optimal sound quality and minimize unwanted noise. The receiver shall include dual RF meters (one
for each antenna), an audio level meter, and a Networking Interface connector for computer control and monitoring. The receiver shall
have a volume control and an adjustable noise squelch control.
The system shall be the Shure UHF-R Wireless.
Antenna Combiners and Accessories
• Antennas and receivers must be from the same frequency
WA371
26A13
• The supplied 1/2 wave antennas can be remotely mounted or
26A14
95A9023
• Antennas and cables for use with the UA845 can also be
WA340
UA710
UA720
UA730
UA820
95A9053
RPW112
RPW114
RPW118
RPW120
RPW122
RPW116
RPW180
RPW184
RK143G
RPM266
RK265G
RK214G
RK312
RK312
RK323G
RK324G
A85WS
44A8031
WA580B
WA580W
band.
mounted directly to the UA845.
used with stand-alone UHF-R receivers.
Passive Antenna/Splitter Combiner Kit
(recommended for 2 receivers)
UHF Antenna Power Distribution Amplifier
(recommended for 3 or more receivers)
1/2 Wave, Omnidirectional, Wideband
Antenna
Active Directional Wideband Antenna
Wideband In-Line RF Amplifier
Passive Unidirectional Wideband Antenna
1/2 wave antennas (2)
H4E, H4 Bands
Q5, Q6, Q10 Bands
25' Antenna Cable (RG-8/X)
50' Antenna Cable (RG-8/X)
100' Antenna Cable
English
UA221
UA845-
U.S.A. UA845US
Europe UA845E
UA845UK
UK
UA860WB
UA870WB
UA830WB
PA805WB
UA820H4
UA820J
J5E, J5 Bands
L3E, L3 Bands UA820L3
UA820Q
R9, ABJ Bands UA820A
UA825
UA850
UA8100
19