English IMPORTANT SAFETY INSTRUCTIONS 14. REFER all servicing to qualified service personnel. Servicing is required when the ap- paratus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been READ these instructions.
English Contents Important Safety Instructions ................................3 Feature Overview ....................................6 System Components ................................... 7 Receiver Controls and Connectors ..............................8 Receiver LCD Interface ..................................9 Receiver Parameters ................................... 9 Connecting Multiple Receivers to the RF Distribution Ports ....................... 10 Automatic Frequency Selection .................................
The system’s band and frequency range are identified on the face of the receiver and transmitter. For example, “X2 925–932 MHz.” For information on bands available in your area, consult your local dealer or phone Shure. More information is also available at Shure’s website (www.shure.com).
All systems include: Two Antenna Cables Two RF Distribution Cables MW4D+ Receiver Two 1/2 Wave Antennas IEC Power Cable Shure’s Wireless Workbench Software 2 Antenna hole plugs 4 Rack Mount Screws with Washers IEC Power Extension Cable AA Batteries Transmitter Carrying Case Ethernet Network Cable with “Ruggedized”...
After changing a parameter, the ENTER button flashes. item you want to select. Press it to save the value. Cursor Control Radio SHURE Push the Control wheel to move Audio 524-025 MHz TV: 32 the cursor to the next item.
Shure UHF-R MW Wireless ® Network Parameters Device ID Assists in identifying receivers through the Wireless Workbench NOTE: Software (has no effect on network identification). The receiver reboots after you press ENTER to accept • Menu: Util > Network network parameter changes 1.
English Automatic Frequency Selection Follow these steps to use the channel scan and group scan features. Before you begin... Install the receivers in the location where they will be used and power them on. • Mute all inputs on mixing devices connected to receivers. •...
Shure UHF-R MW Wireless ® Networking Receivers Basic Network Computer (optional) Connect receivers to an Ethernet router with DHCP service. Use Ethernet Router with DHCP switches to extend the network for larger installations. Use the receiver’s default network setting (Util > Network > Mode = DHCP).
Shure UHF-R MW Wireless ® Transmitter Parameters Press ENTER from the main menu to access the following parameters: Group (G) and Channel (Ch). Must match the receiver’s settings. Frequency (MHz). Manual frequency selection in 0.025 MHz increments. G:34 Ch:21 Gain (Gain). Adjusts audio level from –10 dB to +20 dB 524.025MHZ...
English Automatic Transmitter Sync This feature automatically updates a bodypack or handheld transmitter’s group and channel settings to match those of a selected receiver. To perform a transmitter sync... 1. Open the transmitter battery cover to display the infrared (IR) port. 2.
Shure UHF-R MW Wireless ® Troubleshooting Issue See Solution... No sound Power, Cables, or RF Faint Sound or Distortion Gain Lack of range, unwanted noise bursts, or drop outs Cannot turn transmitter off or change frequency settings, or can’t program receiver...
English Specifications Signal Polarity Positive pressure on microphone diaphragm (or positive Frequency Range and Transmitter Output Power voltage applied to tip of WA302 phone plug) produces positive voltage on XLR output pin 2 with respect to XLR pin 3 and on Band Range Transmitter Power (mW)
Page 18
Shure UHF-R MW Wireless ® Inputs and Outputs Receiver Input MW1 Transmitter Audio Input Antenna Power Connector Type: Connector: 4-Pin male mini connector (TA4M) Actual Impedance: Ω Input Configuration: Unbalanced, active Nominal Input Level: –95 to –30 dBm 100-240 VAC,50/60 Hz...
English Replacement Parts and Accessories Optional Accessories Furnished Accessories SM58 Head with Grille RPW112 SM86 Head with Grille RPW114 Microphone Stand Adapter (MW2) WA371 BETA 58 Head with Grille RPW118 Threaded locking Adapter (with TA4F), MW1 WA340 BETA 87A Head with Grille RPW120 Zipper Bag (MW1) 26A13...
Note: To fully interact with the Receiver, it is recommended to upgrade the UR4 firmware to 1.50 or higher and Shure Wireless Workbench to 5.0.1 or higher LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.
Page 41
한국어 목차 특징 개요 ......................................42 시스템 구성품 ....................................43 수신기 컨트롤 및 커넥터 ..................................44 수신기 LCD 인터페이스 ..................................45 수신기 파라미터 ....................................45 자동 주파수 선택 ....................................45 다수의 수신기를 RF 분배 포트에 연결하기 ............................46 자동 주파수 선택 ....................................47 수신기...
주파수 대역 선택 Shure는 특정 국가 또는 지역의 각종 정부 규정을 준수하기 위해 대역 선택이 가능한 무선 시스템들을 공급합니다. 이러한 규정들은 각 무선 기기 사이의 무선 주파수 (RF) 간섭을 제한하여 텔레비전과 긴급 방송과 같은 지역 공공 통신 채널에의 전파 방해를 예방하기 위한...
선택하고자 하는 메뉴 항목 옆에 있는 파라미터를 변경한 후 , ENTER 버튼이 깜박입니다 . Navigate 키를 누르십시오 . 그것을 눌러 변경 값을 저장하십시오 . 커서 컨트롤 Radio SHURE 다음 항목으로 커서를 옮기려면 Audio 524-025 MHz TV: 32 Control 휠을 누르십시오 . Util G: 3 Ch: 1 Out: -0dB 파라미터...
Shure UHF-R MW Wireless ® 기기 ID 네트워크 파라미터 주: Wireless Workbench 소프트웨어를 이용하여 수신기를 식별하는 데 도움을 줍니다(네트워크 ID 에는 영향이 없음). 수신기는 사용자가 ENTER 를 눌러 네트워크 파라미터를 • 변경한 후 다시 부팅됩니다. 메뉴: Util > Network 듀얼 모델 (MW4D+) 에서, 이 설정은 양쪽 수신기 모두에...
한국어 자동 주파수 선택 채널 스캔과 그룹 스캔 기능을 이용하려면 다음 과정을 따르십시오. 시작하기 전에... •앞으로 사용될 장소에 수신기를 설치하고 전원을 켭니다. • •수신기에 연결된 혼합 장치의 모든 입력을 뮤트시키십시오. • •설정 중인 시스템의 모든 바디팩 또는 핸드헬드 송신기들의 전원을 끄십시오. •...
Shure UHF-R MW Wireless ® 수신기 네트워킹 기본 네트워크 컴퓨터 ( 선택 ) 수신기를 DHCP 서비스의 Ethernet 라우터에 연결하십시오 . 더 큰 설치를 위해 DHCP 의 라우터 네 트워크를 확대하려면 Ethernet 스위치를 사용하십시오 . 수신기의 기본 네트워킹 설정을 사용합니다 (Util > Network > Mode = DHCP).
Shure UHF-R MW Wireless ® 송신기 파라미터 메인 메뉴에서 ENTER 를 눌러서 다음 파라미터에 액세스 합니다 : Group (G) 과 Channel (Ch). 수신기의 설정과 일치해야 합니다 .. 주파수 (MHz). 0.025 MHz 씩 증가하며 수동으로 주파수 선택 .Gain (Gain). 게인 G:34 Ch:21 (Gain).
한국어 자동 송신기 동기화 이 기능은 바디팩 또는 핸드헬드 송신기의 그룹과 채널 설정을 수신기에 맞게 자동으로 변경해 주는 기능입니다. 송신기를 Sync 하려면..1. 송신기 배터리 커버를 열어서 적외선(IR) 포트를 노출시킵니다. 2. 수신기에 노출된 IR 포트로, 수신기 LCD 인터페이스에서 Sync > Sync를 선택합니다. 수신기의...
Page 52
Shure UHF-R MW Wireless ® 문제 해결 문제점 해결책을 참조하십시오... 소리가 안남 파워, 케이블, 또는 RF 소리가 약하거나 왜곡됨 게인 짧은 송수신 범위, 소음 발생, 또는 드롭 아웃 송신기를 끌 수 없거나 주파수 설정을 변경할 수 없거나 송신기 프로그래밍을 할 수 없음...
Page 53
한국어 사양 신호 극성 마이크로폰 진동판에 가해지는 양의 압력 ( 또는 WA302 폰 주파수 범위 및 송신기 출력 플러 그의 팀에 가해지는 양 전압 ) 은 XLR 출력 핀 2 (XLR 핀 3 에 대 해 ) 및 1/4 인치 출력 잭의 팁에 양 전압을 발생시킵니다 . 대역...
Page 54
Shure UHF-R MW Wireless ® 입력 및 출력 수신기 입력 MW1 송신기 오디오 입력 안테나 파워 커넥터 유형 : 커넥터 : 4- 핀 메일 미니 커넥터 (TA4M) 실제 임피던스 : Ω 입력 구성 : 언밸런스드, 액티브 공칭 입력 레벨 : –95 ~ –30 dBm...
한국어 교체용 부품 및 액세서리 액세서리 선택 사양 기본 제공 부속품 그릴 부착 SM58 헤드 RPW112 그릴 부착 SM86 헤드 RPW114 마이크 스탠드 어댑터 (MW2) WA371 그릴 부착 BETA 58 헤드 RPW118 쓰레디드 잠금 어댑터 (with TA4F), (MW1) WA340 그릴 부착 BETA 87A 헤드 RPW120 지퍼...
Page 56
작동할 수 있는 사용자의 권한을 무효화할 수 있습니다 . Shure 무선 마이크 장비의 라이센싱은 사용자의 책임이며 , 인허가 타당성은 사용자의 계층 및 사용 분야와 선택한 주파수에 따라 달라집 니다 . Shure 는 사용자가 주파수를 선택하여 주문하기 전에 적 합한 라이센싱에 관하여 적절한 정보통신 기관에 문의할 것을 강조합니다 .
한국어 X2 FREQUENCY BAND (925-932 MHz) Group Channel Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7 Group 8 925.200 925.150 925.300 925.525 925.325 925.550 925.300 925.325 925.575 925.450 925.775 925.800 925.775 925.975 925.750 925.600 926.125 925.900 926.125...
Page 64
United States, Canada, Latin Asia, Pacific: Europe, Middle East, Africa: America, Caribbean: Shure Asia Limited Shure Europe GmbH Shure Incorporated 22/F, 625 King’s Road Jakob-Dieffenbacher-Str. 12, 5800 West Touhy Avenue North Point, Island East 75031 Eppingen, Germany Niles, IL 60714-4608 USA...