Keypad Interface - Intercom Call Settings - AMX Design XPress Instruction Manual

Keypad Interface

Keypad Interface - Intercom Call Settings

This page is used to configure the intercom zone. The microphone gain and speaker volume can be
adjusted here. These values are stored in memory and used whenever an intercom call is active. The
current volume and gain settings are displayed in percentage values. For example, on the display
shown below, the volume is V50, or 50%. The gain is G80, or 80%.
Pressing the save button stores the new settings and switches the keypad back to the Intercom
Call-In-Progress page (FIG. 60).
FIG. 62 Keypad Interface - Intercom Call Settings Page
46 Design XPress User Interface Guide