Installation
Installing touch panels and a BB-TP1 Back Box (plasterboard)
FIG. 4 shows the AXD-EL+/PB and BB-TP1 Back Box for plasterboard.
BB-TP1 Back
Box enclosure
Knockout
Expansion clip
FIG. 4 AXD-EL+/PB and BB-TP1 Back Box (plasterboard)
1. Cut out the surface using the dimensions shown in FIG. 5.
FIG. 5 Decor style (AXD) and BB-TP2 cutout dimensions for plasterboard
The touch panel must always be installed with the release slot located at the bottom.
6
Plasterboard surface mounting
flanges
Expansion clip
AXD-EL+/PB
faceplate
Release slot
Engraved overlay
Electroluminescent LCD Touch Panels