Installing Touch Panels And A Bb-Tp2 Backbox (Plasterboard) - AMX 8.5" Black/White LCD Instruction Manual

Installation
15. Reconnect the AXlink wiring to the Central Controller and RS-232 wiring (optional) to the
external RS-232 device. The touch panel will beep on power-up.

Installing touch panels and a BB-TP2 Backbox (plasterboard)

FIG. 4 shows the AXD-LC/PB and BB-TP2 UniMount Backbox for plasterboard.
BB-TP2 Unimount
Backbox enclosure
Expansion clips
FIG. 4 AXD-LC/PB and BB-TP2 UniMount Backbox (plasterboard)
1. Cut out the surface using the dimensions shown in FIG. 5.
FIG. 5 Decor-style (AXD) and BB-TP2 cutout dimensions for plasterboard
6
Knockout
Plasterboard surface mounting flanges
AXD-LC/PB
faceplate
Engraved overlay
8.5" Black and White Touch Panels