Adjusting The Speaker Levels - Alpine Multimedia Manager PXA-H900 Owner's Manual

Using Dolby Surround
5.1 ch SETUP

Adjusting the speaker levels

Use the test tones output from the PXA-H900 to adjust so that the
volume of the different speakers is equal.
To achieve a strong sense of presence, adjust so that the volume of
the sound heard from the different speakers at the listening
position is the same.
1
Press the 5.1ch SETUP button.
2
Press the or
LEVEL SETUP".
SPEAKER SETUP
REAR DELAY SETUP
Not displayed when the rear/center speaker setting is set to
*
"OFF".
3
Press the ENTER button. Test tones are output
from the various speaker channels in order for
about 2 seconds each.
L (left front)
LS (left surround)
40
-
EN
button and select "OUTPUT
OUTPUTLEVEL SETUP BI-PHANTOM SETUP
* *
CENTER DELAY SETUP
C (center)
RS (right surround)
,
ENTER
• This function can be set in the
• Avoid stopping, pausing,
*
*
REAR-MIX SETUP
• If a speaker is set to the off
R (right front)
ch UP
ch DN
Pro Logic, DTS, MPEG and
Dolby Digital modes.
switching the disc, cueing, fast-
forwarding or switching the
audio channel of the player while
making this adjustment. The
setting is canceled if the decode
mode is switched.
mode, that speaker's level cannot
be adjusted.
Refer to "Speaker setup" (page
38).