Alpine Multimedia Manager PXA-H900 Owner's Manual page 53

4
Press the or
0 OFF
(ON)
5
Press the or
The level can be set to one of five positions:
–6, –3, 0, +3, and +6. The higher the level, the
more the bass sound output from the rear
speakers. (The effect differs according to the
software (DVD, etc.).)
DOLBY D G I TAL I
REA R – MIX SE T UP
6
Press the 5.1ch SETUP button to complete the
adjustment.
To perform other setup operations, press the
ENTER button to display the setup menu.
button to select "ON".
button to adjust the level.
L C R
LFE
+ 3
Ls Rs
• This adjustment cannot be
performed when the rear speaker
setup setting is set to "OFF".
• The off mode is set automatically
when the rear speaker setup
setting is set to "OFF".
• When the "REAR-MIX"
function is turned "ON", sound
may be produced from the rear
speakers even if the rear speakers
are set to "OFF". If you do not
want sound to be produced from
the rear speakers, turn the
"REAR-MIX" mode "OFF".
• If the "REAR-MIX" adjustment
is performed when the "REAR
FILL" function is on, during the
2-channel decode mode the
"REAR FILL" function is given
priority, so the sound does not
change as adjusted with the
"REAR-MIX" function.
• Once the settings are made, we
recommend storing them in the
memory. See page 52 for
instructions.
49
-
EN