Using Dolby Surround; Using The Pro Logic Mode - Alpine Multimedia Manager PXA-H900 Owner's Manual

Using Dolby Surround

PL / REAR FILL

Using the Pro Logic mode

With the PXA-H900, Pro Logic processing can be conducted on
the music signals recorded on two channels to achieve Dolby Pro
Logic surround sound. For two-channel Dolby Digital, DTS and
MPEG2 signals, there is also a "REAR FILL" function for
outputting the signals of the front channel to the rear channel.
1
Press the PL/REAR FILL button to select the
desired mode.
DOLBY PROLOGIC
DOLBY D G I TAL
D OLBY P L / REA A R I L L
DOLBY P O R
36
-
EN
REAR FILL
I
L R
F
L OGIC
S
• This function only works with
two-channel signals. This
operation cannot be performed
when 5.1-channel DTS or Dolby
Digital signals are input.
• "REAR FILL" function
Depending on the input signals,
the sound may only be output
from the front speakers. In this
case, the "REAR FILL" function
can be used to output signals
from the rear speakers as well.
• Once the settings are made, we
OFF
recommend storing them in the
memory. See page 52 for
instructions.
• When the "REAR FILL" mode is
turned on, sound may be
produced from the rear speakers
even if the rear speakers are set
to "OFF". Do not use the
"REAR FILL" function if you do
not want to output sound from
the rear speakers.
• The HDCD decode mode cannot
be used in the "DOLBY
PROLOGIC" mode.