Alpine PXA-H510 Owner's Manual page 38

1
DEF.
A.PROC
IIIIIII PARAMEEQ
DOLBY TIMETCRR
2
DOLBY SPEAKER
LISTEN R DELAY
3
ENT
38
Using Dolby Surround
Setting the speaker mode
The PXA-H510 can be set according to the
frequency reproduction range of the speakers
being used. Check the frequency reproduction
range of the speakers before performing this
operation.
Press "A.PROC" and select the "DOLBY
SURROUND" mode.
SURROUND
PRIVATE
Use the " " or " " key to select the
"SPEAKER" (speaker selection) mode.
In this mode set the properties of the speakers
and whether or not speakers are connected.
TESTTONE BI-PHTM
C DELAY REAR-MIX
Press "ENT".
English