Displaying Bgp Settings And Statistics - Alcatel 060320-10, Rev. B Configuration Manual

Advanced routing configuration guide
Table of Contents

Advertisement

Configuring BGP

Displaying BGP Settings and Statistics

Use the show commands listed in the following table to display information about the current BGP config-
uration and on BGP statistics:
show ip bgp
show ip bgp statistics
show ip bgp aggregate-address
show ip bgp dampening
show ip bgp dampening-stats
show ip bgp network
show ip bgp path
show ip bgp neighbors
show ip bgp neighbors policy
show ip bgp neighbors timer
show ip bgp neighbors statistics
show ip bgp policy aspath-list
show ip bgp policy community-
list
show ip bgp policy prefix-list
show ip bgp policy route-map
show ip redist
show ip bgp routes
For more information about the output from these show commands, see the OmniSwitch CLI Reference
Guide.
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide
Displays the current global settings for the local BGP speaker.
Displays BGP global statistics, such as the route paths.
Displays aggregate configuration information.
Displays the current route dampening configuration settings.
Displays route flapping statistics.
Displays information on the currently defined BGP networks.
Displays information, such as Next Hop and other BGP attributes, for
every path in the BGP routing table.
Displays characteristics for BGP peers.
Displays current inbound and outbound policies for all peers in the
router.
Displays current and configured values for BGP timers, such as the hold
time, route advertisement, and connection retry.
Displays statistics, such as number of messages sent and received, for
the peer.
Displays information on policies based on AS path criteria.
Displays information on policies based on community list criteria.
Displays information on policies based on route prefix criteria.
Displays information on currently configured route maps.
Displays the route map redistribution configuration.
Displays information on BGP routes known to the router. This informa-
tion includes whether changes to the route are in progress, whether it is
part of an aggregate route, and whether it is dampened.
Displaying BGP Settings and Statistics
March 2011
page 3-63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 7

Table of Contents