Hardware Settings - Alcatel 1850 TSS-320 Technical Handbook

5 HARDWARE SETTINGS

This chapter contains the documents sheets to refer to for unit/sub-unit hardware setting options.
Each paragraph is dedicated to a single unit/sub-unit or to a group of unit/sub-unit with the same hardware
setting.
Each paragraph contains:
• one or more tables defining the relationship between the functions achievable and the setting
options to make;
• the unit layout drawing which shows the exact location of all the setting options.
In case of hardware setting modification in the same unit, all of the different option are present in the
paragraph.
Details about unit identification Part Number and Change Status are defined in next paragraph.
N.B.
N.B. When necessary to make "TC" Hardware Settings fitted on the rear side of the board, remove
the protective cover plate present on the same rear side and replace it at the end of the
operation
The setting options described in this chapter must be used according to 3AL377470001 (962.000.022 F)
MSxxx document, inserted in paragraph ...., which shows the 'ON' (closed) position of microswitches.
Those setting options that on the table are indicated by the caption For factory use only should never
be modified.
The HARDWARE SETTINGS can be executed after having checked all the sub-units belonging to a unit,
and by using the presetting indication presented in this chapter.
Technical Handbook SDH
Hardware Settings
IDENTIFIES PIN 1 OF COMPONENT
Alcatel 1850 TSS-320 Rel.1.1
8DG 07734 CAAA Edition 01 67/84