Table of Contents
Advertisement
Configuring BGP
Parameter Description
Enable or disables maximum pre-
fix warning for a peer.
Allows external peers to commu-
nicate with each other even when
they are not directly connected.
Configures the BGP peer name.
Sets the BGP peer to use its own
peering address as the next hop in
UPDATE messages.
Configures the local BGP
speaker to wait for this peer to
establish a connection.
Enables or disables the stripping
of private autonomous system
numbers from the AS path of
routes destined to this peer.
Enables or disables BGP peer
soft reconfiguration.
Configures this peer as a member
of the same confederation as the
local BGP speaker.
Configures the local transport
endpoint address for this neigh-
bor's peering session.
Note. BGP peers are not dynamically learned. BGP peers must be explicitly configured on the router using
the
ip bgp neighbor
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide
Command
ip bgp neighbor maximum-prefix
warning-only
ip bgp neighbor ebgp-multihop
ip bgp neighbor description
ip bgp neighbor next-hop-self
ip bgp neighbor passive
ip bgp neighbor remove-private-as
ip bgp neighbor soft-reconfiguration
ip bgp confederation neighbor
ip bgp neighbor update-source
command.
Configuring a BGP Peer
Default Value/
Comments
80 percent
disabled
peer IP address
disabled
disabled
disabled
enabled
disabled
Not set until configured
March 2011
page 3-27
Advertisement
Table of Contents
