Table of Contents
Advertisement
Configuring OSPFv3
2
Then use the
ipv6 ospf virtual-link
-> ipv6 ospf virtual-link area 0.0.0.1 router 2.2.2.2
3
Next, enter the following command on Router B:
-> ipv6 ospf virtual-link area 0.0.0.1 router 1.1.1.1
Now there is a virtual link across Area 0.0.0.1 linking Router A and Router B.
4
To display virtual links configured on a router, enter the following show command:
-> show ipv6 ospf virtual-link
5
To delete a virtual link, enter the
information, as shown:
-> no ipv6 ospf virtual-link area 0.0.0.1 router 2.2.2.2
Modifying Virtual Link Parameters
There are several parameters for a virtual link (such as hello-interval and dead-interval that can be modi-
fied at the time of the link creation. They are described in the
tion. These parameters are identical in function to their counterparts in the section
Parameters" on page
Configuring Redistribution
It is possible to learn and advertise IPv6 routes between different protocols. Such a process is referred to as
route redistribution and is configured using the
Redistribution uses route maps to control how external routes are learned and distributed. A route map
consists of one or more user-defined statements that can determine which routes are allowed or denied
access to the network. In addition a route map may also contain statements that modify route parameters
before they are redistributed.
When a route map is created, it is given a name to identify the group of statements that it represents. This
name is required by the ipv6 redist command. Therefore, configuring route redistribution involves the
following steps:
1
Create a route map, as described in
2
Configure redistribution to apply a route map, as described in
tion" on page
2-22.
Note. An OSPFv3 router automatically becomes an Autonomous System Border Router (ASBR) when
redistribution is configured on the router.
page 2-18
command on Router A as shown:
ipv6 ospf virtual-link
2-17.
"Using Route Maps" on page
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide
command with the area and far end router
ipv6 ospf virtual-link
ipv6 redist
command.
2-19.
"Configuring Route Map Redistribu-
Configuring OSPFv3
command descrip-
"Modifying Interface
March 2011
Advertisement
Table of Contents
