Table of Contents
Advertisement
Theft indicator
The theft indicator on the instrument cluster will
operate as follows:
When the ignition is OFF, the theft indicator will
flash briefly every 2 seconds to indicate the
SecuriLock
When the ignition is turned to RUN or START, the
theft indicator will light for 3 seconds and then go
out. If the theft indicator stays on for an extended
period of time or flashes rapidly, have the system
serviced by your dealership or a qualified technician.
Programming spare SecuriLock
Spare SecuriLock
your dealership and programmed to your
SecuriLock
of 8 keys). Your dealership can program your new
SecuriLock
yourself using the following simple procedure. To
program a new SecuriLock
need two previously programmed SecuriLock
(keys that already operate your vehicle's engine). If
two previously programmed SecuriLock
not available (one or both of your original keys were
lost or stolen), you must bring your vehicle to your
dealership to have the spare SecuriLock
programmed.
Procedure to program spare SecuriLock
to your vehicle
New SecuriLock
mechanical key cut for your vehicle.
Conventional (non-SecuriLock ) keys cannot be
programmed to your vehicle.
You will need to have two previously programmed
SecuriLock
SecuriLock
procedure. Please read and understand the entire
procedure before you begin.
Controls and features
system is protecting your vehicle.
keys can be purchased from
passive anti-theft system (up to a total
key(s) to your vehicle or you can do it
keys must have the correct
keys and the new unprogrammed
key readily accessible for the
keys
key yourself, you will
keys are
keys
key(s)
keys
61
Hide quick links:
Advertisement
Table of Contents
