Ford 1998 Mustang Owner's Manual page 179

Capacities and specifications
Fluid
Fuel tank
Trans-
mission
fluid
Windshield
washer
fluid
1
If your engine coolant is green in color, use Ford
Premium Cooling System Fluid. If your coolant is
orange in color, use Ford Extended Life Engine
Coolant. Refer to Adding engine coolant, in the
Maintenance and Care chapter.
2
Rear axle lubricants do not need to be checked or
changed unless a leak is suspected, service is required
or the axle assembly has been submerged in water. The
axle lubricant should be changed any time the rear axle
has been submerged in water. Fill 6 mm to 14 mm
(1/4 inch to 9/16 inch) below bottom of fill hole. Add
118 ml (4 oz.) of additive friction modifier
C8AZ-19B546-A, Ford specification EST-M2C118–A for
complete refill of Traction-Lok axles.
3
Service refill capacity is determined by filling the
transmission to the bottom of the filler hole with the
vehicle on a level surface.
Ford Part
Name
N/A
Motorcraft
MER-
CON V
ATF
Motorcraft
MERCON
ATF
Ultra-Clear
Windshield
Washer
Concentrate
Appli-
cation
All
Automatic
with 3.8L
OHV V6
engine
Automatic
with 4.6L
SOHC V8
engine
Manual
with 3.8L
OHV V6
engine
Manual
with 4.6L
SOHC V8
3
engine
All
Capacity
58.7L (15.5
gallons)
13.1L (13.9
quarts)
12.0L (12.8
quarts)
2.6L
(5.6 pints)
3.1L
(6.6 pints)
Fill to line
on
reservoir
179