Transferring A Door Call To Another Residential Station [Room Call] - Aiphone JM-4HD Installation & Operation Manual

Transferring a door call to another
residential station [ROOM CALL]
You can transfer a call received from a door station to a single
or all the other residential stations while communicating with it.
1
While talking with the door station, touch
ROOM CALL .
2
Select another residential station, or touch
ALL CALL to transfer the call to all other residential
stations.
Communication with the door station is suspended while
*
forwarding call to residential stations.
Your speaking is heard and the image of the door station is
displayed on the target residential station(s).
3
When someone touch
the target residential station (or one of the target
stations), talking begins with the target station side.
4
Say that you will transfer the call from a door station to
the target station, and then touch END .
At the same time, the communication between you and the
door station ends
5
When someone touches
the target station, he (or she) can talk with the door
station side.
If handset is lifted in step
*
handset again to talk with the door station side.
22
MENU
TALK or lift handset on
TALK or lifts handset on
3, hang up once and then lift
Priority of actions
The order of priority for two or more actions
(communication, calling, monitoring, etc.) performed at the
same time is as follows.
Priority
1 (high)
2
→
3
4
5
6
7 (low)
Later call from a door station has priority over earlier
*
call from another door station.
When this station is receiving a call from a residential
station, other residential stations cannot be used.
You can call and talk to all or a single residential
*
station while communicating with a door station.
Later monitoring has priority over earlier one.
*
Action
Triggering alarm (SECURITY)
Triggering alarm (OPTION) (when "ALARM AT
DOOR" is set to "ENABLE")
Communication with another station
Receiving a call from a door station
Calling all or a single residential station
Triggering alarm (OPTION) (when "ALARM AT
DOOR" is set to "DISABLE")
Monitoring