Monitoring; Monitoring A Door Station - Aiphone Tenant IXG Series Operation Manual

3
How to use

Monitoring a door station

Video and audio of the following stations can be monitored.
• Entrance Station
• Door Stations
• Network cameras
Only audio will be monitored on Audio Door Stations.
If a network camera is associated with an Audio Door Station, video will be monitored from the network camera, and
audio will be monitored from the Audio Door Station.
Audio from this station cannot be heard by the other party during monitoring. However, the other party may be notified
that they are being monitored using a notification tone or flashing LED, depending on the settings of the destination
station.
Monitoring may not be able to be performed if the destination station is in any of the following situations.
• During an outgoing call
• During an incoming call
• Incoming Page
• In communication
• Set to prevent being monitored
1.
Tap [MONITOR] on the Home
Screen.
2.
Select a station to monitor.
• The calling tone plays until monitoring begins.

Monitoring

3.
View the video and audio.
• Refer to "Buttons (→page 11)"
operations during monitoring.
4.
Tap
25
for the available
to end monitoring.