Assigning An Id To Station [Id Setting]; Initializing Station [Initialize]; Identifying Software Version [Software Version] - Aiphone JM-4HD Installation & Operation Manual

Assigning an ID to station
[ID SETTING]
The ID setting should be made to all the sub master stations
*
individually.
* Do not assign the same ID to two or more sub master
stations.
1
From the [INSTALL] menu window, touch ID SETTING .
"2" to "8" are displayed.
The current ID number is highlighted.
2 To change the ID number, touch the number until
highlighted
.
3 ENTER to save ID .
Touch
* When ID is changed, this station will be rebooted.

Initializing station [INITIALIZE]

By initializing this station, all settings return to default.
1
From th e [INSTALL] menu window, touch INITIALIZE .
A notice message is displayed.
2
Touch YES to continue initializing.
To cancel initializing, touch NO .
Identifying software version
[SOFTWARE VERSION]
You can identify the software version of this station. Use this
item when doing maintenance etc.
From the [INSTALL] menu window, touch
SOFTWARE VERSION .
The ID number and software version of this station will be
displayed.
11