Printer Configuration - Olivetti d-Copia 42 Operation Manual

6.Printer Configuration

(1) Making a test print
When the printer is being used for the first time, or when settings in the printer have
been changed, print out a test page to confirm whether or not printing will be accom-
plished as expected.
Allows you to print the current printer settings, such as emulation mode, fonts and
1
memory status, to the printer.
Press the "TEST PRINT" key.
2
The test print item select screen will appear.
* The Network setting key is displayed only if the network board is installed. For
details, refer to "(3)Network settings".
Three test print keys are displayed in the test print item select screen, so press the
3
desired one. A test print will be made, and when the test print is completed the printer
setting screen will reappear.
1 STATUS
Prints out the current printer settings (e.g. emulation, fonts, memory status) to the
printer.
2 LIST OF RESIDENT FONTS
Print outs the fonts that can be printed.
3 SERVICE STATUS PAGE
Designed for use by service personnel.
15