Olivetti d-Copia 16 Operation Manual page 87

5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
Low Power Mode Transition Time
Set the time interval from the time operations end to the automatic
engagement of the Low Power Mode.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F35".
Inch specifications
3
Press the [Enter] key.
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
Section 6 COPIER MANAGEMENT
4
Press either the Zoom (+) key or the Zoom (–) key and select
an time interval from 1 minute to 240 minutes.
Inch specifications
Note
The time intervals available are: 1, 5, 15, 30, 45, 60, 90,
120, 180 and 240 minutes.
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
Off Mode Transition Time
Set the time interval for automatically entering Off Mode when
copying is completed or after operations have been finished.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications
Metric specifications
Metric specifications
6-31