Olivetti d-Copia 16 Operation Manual page 64

Section 6 COPIER MANAGEMENT
Display
Settings Items
Items
F13 Drawer Selection
F14 Selected Drawer
F15 Auto Drawer
Switching
F16 Auto Sizing
F17 Drawer Paper Size
(Drawer 1)
F18 Drawer Paper Size
(Drawer 2)
F19 Drawer Paper Size
(Drawer 3)
F20 Drawer Paper Size
(Drawer 4)
F21 Multi-bypass Tray
Paper Size
6-8
Description
Selects whether the drawer with the same size of
paper as the manuscript size will be automatically
selected or whether a selected drawer level is to be
used.
Selects the drawer that is to be automatically be given
priority for use.
* Manual paper feeding cannot be set using the
Selected Drawer function.
* Drawers 2 to 4 will be displayed only when the
optional Paper Feeder is installed.
Switches feeding over automatically to a drawer
holding paper of the same size/orientation and copying
continues when the paper in the drawer being used
runs out.
* This will be displayed when the optional Paper
Feeder is installed.
Sets whether or not to use automatic magnification
(zoom/reduction percentage) when a paper drawer has
been selected.
Automatically detects the paper size in the supply
drawers (1 - 4).
When it is to be detected in inches, set this to AtI
(automatic detection in inch units); when paper size is
to be detected in centimeters, (A⋅B columns) set this to
AtC (automatic detection in centimeter units) and
when Oficio II size is to be used set this to o2r.
* Drawers 2, 3 and 4 will be displayed only when the
optional Paper Feeder is installed.
Sets the size of paper to be manually fed in.
* When using Custom 1 or 2, set the paper size using
F22 and F23.
Available settings
1-: Automatic Paper Selection*
2-: Selected Drawer
1-: Drawer 1*
2-: Drawer 2
3-: Drawer 3
4-: Drawer 4
on: Enabled*
oFF: Disabled
on: Enabled
oFF: Disabled*
AtI: Automatic Detection in
Inch units (*AtI: Inch
specifications)
AtC: Automatic Detection in
centimeter units (A⋅B columns)
(*Atc: Metric specifications)
o2r: Oficio II
[Inch specifications]
UnI: Universal Size*
Ldr: Ledger Horizontal
LGr: Legal Horizontal
Ltr: Letter Horizontal
LtE: Letter Vertical
Str: Statement Horizontal
Cu1: Custom 1
Cu2: Custom 2
[Metric specifications]
UnI: Universal Size*
A3r: A3 Horizontal
A4r: A4 Horizontal
A4E: A4 Vertical
A5r: A5 Horizontal
b4r: B4 Horizontal
b5r: B5 Horizontal
For: Folio Horizontal
Cu1: Custom 1
Cu2: Custom 2
Reference
Page
6-19
6-20
6-20
6-21
6-21
6-22