Olivetti d-Copia 16 Operation Manual page 66

Section 6 COPIER MANAGEMENT
Display
Settings Items
Items
F29 Merge Copy
Borderline
F30 Rotate Sort Setting
F31 Silent Mode
Transition Time
F32 Auto Clear Setting
F33 Auto Off Setting
F34 Auto Clear Time
F35 Low Power Mode
Transition Time
F36 Off Mode Transition
Time
F37 Alarm
F38 Toner Coverage
Report
6-10
Description
Selects the type of borderline to be used in the Layout
mode.
Sets the copier so that each copy set is rotated and
sorted when it is sort-copied.
Shortens the amount of time the internal motor
continues to run after the copy is produced. Use this
setting in cases when the motor noise is bothersome.
Sets the copier so that automatic clearing is executed
after a set amount of time has elapsed after the copy is
produced. (Refer to P.2-4 "Regarding the Auto-clear
function".)
The Auto Off mode will be entered after a set period of
time has passed after the final copy has been produced
or during which no operations have been performed.
If the Auto Off function interferes with your copy
operations, disable the function. Before disabling the
Auto Off function, you may want to try lengthening the
amount of time before the Auto Off function engages
(Off Mode Transition Time).
Sets the time interval prior to the automatic operation
of the Auto Clear function when on (Enable) has been
selected as the Auto Clear setting.
* This will not be displayed when F32 is set to "oFF".
Sets the time interval prior to the automatic
engagement of the Low Power mode after copy
operations have been completed.
Sets the time interval prior to the automatic operation
of the Auto Clear function when on (Enable) has been
selected as the Auto Clear setting.
* This will not be displayed when F33 is set to "oFF".
The Alarm can be set to sound when a key on the
Operation Panel is pressed or in cases when errors
occur, etc.
Prints out a report that shows the number of copies
made and the average amount of toner used (blackness
ratio %) for each paper size.
Available settings
1-: No Borderline*
2-: Solid Line
3-: Dotted Line
on: Rotational Sorting Enabled
oFF: Rotational Sorting
Disabled*
0, 5, 10, 15, 30 (seconds) (*10)
on: Enabled*
oFF: Disabled
on: Enabled*
oFF: Disabled
10 - 270 (10-second units) (*90)
1, 5, 15, 30, 45, 60, 90, 120, 180,
240 (minutes) (*15)
1, 5, 15, 30, 45, 60, 90, 120, 180,
240 (minutes) (*30)
on: Enabled (sound alarm)
oFF: Disabled (no alarm)*
---
Reference
Page
6-27
6-28
6-28
6-29
6-29
6-30
6-31
6-31
6-32
6-33