Olivetti d-Copia 16 Operation Manual page 78

Section 6 COPIER MANAGEMENT
2
Press either the Zoom (+) or Zoom (–) key to display "F17".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) or Zoom (–) key and select "AtI"
when automatic detection in inch units is to be performed
and "AtC" when the detection is to be done in centimeter
units. When setting the Oficio II size, select "o2r".
Inch specifications
Note
Drawers 2, 3 and 4 will be displayed only when the
optional Paper Feeder is installed.
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
6-22
Metric specifications
Metric specifications
Metric specifications
Metric specifications
Multi-bypass Tray Paper Size
Sets the Manual Paper Feed Size.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F21".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
the paper type.
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications