Olivetti d-Copia 16 Operation Manual page 84

Section 6 COPIER MANAGEMENT
Rotate Sort Setting
Set whether or not to change the direction for each copy set and
sort it when sorting copies.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F30".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
"on" to change the direction for each copy set and sort it or
"oFF" to sort in the same direction.
Inch specifications
6-28
Metric specifications
Metric specifications
Metric specifications
Metric specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
Silent Mode Transition Time
Shortens the amount of time the internal motor continues to run
after the copy is produced. Use this setting in cases when the motor
noise is bothersome.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F31".
Inch specifications
3
Press the [Enter] key.
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications