Table of Contents
Advertisement
3.
Select "Local printer attached to this computer" and
ensure that the "Automatically detect and install my Plug
and Play printer" check box is not selected. Click Next.
4.
Select "Create a New Port" and change "Type of Port:" to
"Standard TCP/IP Port".
5.
Click Next. The "Add Standard TCP/IP Printer Port Wizard"
is displayed.
6.
Click Next and enter the host name or IP address for the
printer, for example, '192.168.1.31'. If the above IP
address is entered, the Port Name will default to
IP_192.168.1.31.
7.
Click Next. "Additional Port Information Required" is
displayed.
8.
Under "Device Type", select Custom and click Settings.
9.
Depending on whether you are installing the Windows
Standard TCP/IP Port using LPR or Port 9100, enter the
following details:
LPR
>
Set "Protocol" to LPR.
>
Under "LPR Settings", enter Queue Name: 'lp' and ensure
that "SNMP Status Enabled" is not selected.
Port 9100
>
Set "Protocol" to Raw.
>
Ensure that the "Port Number" is 9100 and that "SNMP
Status Enabled" is not selected.
10.
Click OK.
11.
Click Next.
12.
Click Finish and follow the instructions on the screen to
finish installing the printer.
Windows> 25
Advertisement
Table of Contents
