Table of Contents
Advertisement
4.
Select Software Utilities -> Install Network Card Setup.
The Network Card Setup Installshield Wizard is displayed.
5.
Click Next.
6.
Select "I accept the terms of the licence agreement" and
click Next.
7.
On the "Select Launch Method" dialog, chose whether to
"Launch it now without installing" or "Install now to use
it". If you select "Install now to use it", click Install in the
following dialog box.
8.
The "Printer Discovery" message is displayed. When the
printer is detected, the Network Card Setup utility
launches, displaying the printer status and network
information.
NOTE:
In the "Network Card Setup", the "IP Acquisition Method" may
display as "Manual". This is because, when using the TCP/IP
protocol in an environment without a DHCP server, you must
assign the IP address manually. For instructions on how to do
this, see "Manually configuring the IP address" on page 19.
Now that both Windows and the printer have been configured to
use TCP/IP, the next step is to configure Windows to print to the
network printer.
S
N
TARTING THE
ETWORK
Once installed, you can launch the Network Card Setup utility by
selecting Start -> Programs -> Okidata -> Network Card Setup.
C
S
ARD
ETUP UTILITY
Windows> 18
Advertisement
Table of Contents
