3.
Click OK. The "Admin Password Required" dialog box
appears.
4.
Enter the admin password as requested and click OK.
5.
The "Setup Completed" message is displayed.
If you now try to view the Printer Web Page, an error message is
displayed (containing instructions on how to enable the Printer
Web Page again).
U
E
PDATING
NVIRONMENT
To change how the Network Card Setup utility searches for
printers. You can update the environment settings or the display
options on the Network Card Setup utility:
1.
Select Options -> Environment Settings.
2.
You can apply the following changes:
• Enter the IP Broadcast Setting and click Add.
• Select or clear the "Search Local Subnets" check box.
• Under the "Time Out" tab, modify the "Printer
Discovery" and "Setting" intervals.
• Under the "Display Item" tab, you can clear "Display
Item Setting" check boxes to prevent them from
appearing in the main "Network Card Setup" pane.
3.
You can restore default settings by opening this dialog and
clicking Default.
V
IEWING THE PRINTER WEB PAGE
To view the printer web page, click on the "View Web Page"
icon.
U
NINSTALLING THE
To uninstall the Network Card Setup utility:
1.
Select Start -> Control Panel.
2.
Select 'Oki Network Card Setup' and click Remove. This
removes the Network Card Setup utility from your
computer.
S
ETTINGS
N
C
S
ETWORK
ARD
Windows> 20
ETUP UTILITY