Light Indicator (Led) Functions - NEC SuperScript 100C User Manual

Light indicator (LED) functions

ON Line
Lit
Off
flashing slowly
flashing slowly
flashing rapidly
LED's
Power
Lit
Lit
flashing slowly
flashing slowly
flashing rapidly
Indication
The printer is powered and ON LINE.
The printer is powered and OFF LINE.
An error condition has occurred in the
printer.
Open the top cover of the printer to check
the print head carriage position with
respect to the action items embossed on the
inside of the front cover.
If the print head carriage indicates 1 CHECK
PAPER there is no paper in the ASF or there
is a paper jam.
Load paper, or a document or an envelope, in
the ASF, or remove the jammed document.
If the print head carriage indicates 2
CHANGE COLOR/ BLACK SWITCH POSITION, the
position of the print head selection lever
is not compatible with the type of print
head inserted.
Correct the position of the lever.
If the print head carriage indicates 3
CHANGE INK CARTRIDGE, an "ink cartridge
empty" ("end of ink") condition has
occurred.
Replace the print head.
If the print head carriage indicates 4
CHANGE PRINT HEAD, there is no print head in
the printer, the print head inserted is
not compatible with the driver selected, or
the Install Cartridge key has been
pressed.
Insert a print head, exchange the type of
print head inserted, or replace the print
head.
After correcting the error condition, press
Install Cartridge to return the print head
carriage to its rest position.
If there is no operator intervention within
60 seconds *(with a monochrome print head
inserted; *30 seconds if a color print
head is inserted) of the error being
signaled, the print head carriage will
return to its rest position **. To reread
the error indication,, press Install
Cartridge
** The print head carriage will not return
to its rest position if there is no print
head inserted or if the print head selection
lever is not in the correct position.
Failure condition.
Disconnect the printer from the power
supply. Make sure the print head carriage
and paper feed paths are not obstructed and
then reconnect the printer to the mains
power supply. If the light indicators
continue flashing rapidly, disconnect the
printer and call the technical assistance
service or your dealer.