NEC SuperScript 100C User Manual page 50

Printer Settings
This appendix contains a brief description of the printer settings available with
the resident emulation's, using the printer setup utility.
Factory Settings
When you receive the printer, its basic operating parameters are already
set with pre-defined factory settings (default settings for PCL III+ emulation).
These are the settings which appear in the print test the very first time you run
it (see specific section in Chapter 5).
Your printer emulation is set to be compatible with the diskette included with
your printer. You should not have to vary anything. If you wish to change the
emulation, remember to check that it is compatible with your application driver,
otherwise your printer will not operate correctly.