NEC SuperScript 100C User Manual page 37

Fonts
Scalable and/or TrueType fonts are available when you operate in a Microsoft
Windows environment, level 3.1 or later.
character and symbol outlines and are expanded only when the specific font is
selected.
You cannot use the printer's resident fonts in Windows environment.
the fonts available in Windows.
Print quality
High Quality (LQ)
Presentation
Draft
Economy
Paper type
If you select Transparency, output will be LQ, regardless of the print quality
parameter setting selected.
DOS Environment
If you use a DOS Software program, you will require a specific driver for each
printer model and application to access the main features of your printer. Ask
your computer dealer for advice.
To install any of the drivers, always refer to the specific software application
documentation. Should any of the parameters you require not be accessible through
the driver, you can access them using the printer SETUP utility.
Your printer has two resident emulation's: PCL III + (default value) and IBM
Proprinter X24 Model 4207/1 that may be used with DOS applications:
PCL III + mode:
Choose the PCL III + driver when setting your application software. If PCL III +
is not available, choose HP DeskJet 500C or HP DeskJet 500. The PCL III + mode
supports both color and black printing.
IBM Proprinter X24 mode:
Choose the IBM Proprinter X24 Model 4207/1 driver when setting your application
software. Note that this mode only supports black printing with the black print
head. Attempting to print with the color print head installed will result in an
error condition. The "demo" page is not available if this emulation is selected.
Running the Printer Set-Up Utility
This program is aimed at DOS-based applications. It should be used
if the feature you require cannot be selected through the driver you
have installed or if no driver is available.
We suggest that you make a copy this program on another diskette, and keep the
original as a master.
Note for Windows® 95 users
If you have Windows<190> 95 installed on your PC, BEFORE running the SETUP
utility, you must disable the DOS spooler, as follows:
1. In the Printers folder, select your printer then Properties tab.
2. In the Details sheet, click on the Port Settings button.
3. A window entitled Configure LPT ports opens, with the option Spool MS-DOS print
jobs selected.
4. Click on the box, to deactivate the option. This will enable the DOS
application to handle the port directly.
5. Close Windows® 95.
gives a combination of speed and good
gives best quality at a lower speed
gives fast printing
saves ink
These fonts are stored mathematically as
You must use