To Switch The Fan On; Filter Operating Hours Counter - Miele DA 226-2 Operating And Installation Manual

The number of hours the appliance has
been in operation is stored in memory.
The indicator lamp for the grease filter
control will light up after 30 hours of
operation. The grease filters must then
be cleaned.
After the grease filters have been
cleaned and put in place, the filter oper-
ating hours counter must be re-set.
To do this, press the grease filter
touch control for about 3 seconds.
The indicator lamp will go out.
Before reaching the end of the period
set, you can check the percentage of
time set which has already been used
up.
Use the On/Off touch control to
switch the fan on.
Press the grease filter touch control.
One or several of the indicator lamps
for the / touch controls will flash.
The number of flashing lamps shows
the percentage of the operating time
which has already been used up.
1 lamp = 25 %
2 lamps = 50 %
3 lamps = 75 %
4 lamps = 100 %
The operating hours completed remain
in memory, even when the machine is
switched off or there is a power cut.
13