Miele DA 226-2 Operating And Installation Manual page 31

Screw the extension piece firmly to
the upper retaining plate at each
side with two screws 3.9 x 7.5 mm.
The paper protective sheet protects the
extension piece from being scratched
when the tower is being fitted. It is
removed when fitting is complete.
Fold the protective sheet at the top.
Remove the protective foil from
around the sticking points.
Stick the protective sheet to the ex-
tension piece so that it is smooth at
the sides and flush at the bottom.
Before fitting remove the protective
foil.
Hold the main tower gently apart and
fit it over the extension piece.
Then slide the chimney piece down
approx. 2 cm into the canopy.
Adjust the shaft.
Remove the protective sheets.
31