Miele DA 2210 Operating And Installation Instruction
Hide thumbs
Also See for DA 2210:
- Operating and installation instructions (44 pages) ,
- Dimensions (1 page) ,
- Operating and installation manual (40 pages)
Related Manuals for Miele DA 2210
Summary of Contents for Miele DA 2210
- Page 1 Operating and Installation Instructions Ventilation System DA 2280 DA 2210 en - US, CA To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 07 773 240...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 3 Functional description ..........7 Guide to the Ventilation System . -
Page 3: Important Safety Instructions
Use this appliance only in the manner intended by the manufacturer. Read these instructions carefully If you have questions, contact Miele. before installing or using the b) Before servicing or cleaning the Ventilation System. appliance, switch power off at the... - Page 4 IMPORTANT SAFETY INSTRUCTIONS d) Before connecting the appliance to the power supply make sure that the ,WARNING voltage and frequency listed on the data plate correspond with the TO REDUCE THE RISK OF A household electrical supply. COOKTOP GREASE FIRE: This data must correspond to prevent appliance damage.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS ,WARNING Do not allow children to play with or operate the appliance or its controls. TO REDUCE THE RISK OF Supervise its use by the elderly or INJURY TO PERSONS IN THE infirm. EVENT OF A COOKTOP Always turn on the hood when using GREASE FIRE, OBSERVE THE the cooktop to prevent damage from...
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Installation g) Do not install this hood over cooktops that burn solid fuel. ,WARNING h) Provided a larger distance is not TO REDUCE THE RISK OF given by the manufacturer of the FIRE, ELECTRIC SHOCK, OR cooktop, follow the minimum safety distances between a cooktop and the INJURY TO PERSONS, bottom of the hood given in the...
-
Page 7: Functional Description
"Cleaning and Care". The DA 2280 is equipped with one non-return flap, the DA 2210 comes with two non-return flaps. -
Page 8: Guide To The Ventilation System
Guide to the Ventilation System... -
Page 9: Guide To The Ventilation System
Filter timers"). mode – to change the number of hours DA 2280: 2 filters counted by the grease filter timer DA 2210: 4 filters (see "Operation/Reprogramming the timers"). Grease filters Charcoal filter button Fan power selection... -
Page 10: Operation
The maximum air flow capacity is 425 cfm. Factors such as narrow duct diameters and bends will affect this value. DA 2210 The fan runs at power level "2" and the The maximum air flow capacity is second indicator of the fan power scale 850 cfm. -
Page 11: Delayed Shut Down
Operation Delayed Shut Down Automatically switching back to the "Intensive" setting If odors or smoke remain in the kitchen The intensive level "4" can be after cooking has been completed, the programmed to automatically switch Delayed Shut Down feature can be selected to allow the hood to continue back to level "3"... -
Page 12: Overhead Lighting
Operation Overhead lighting Dimming the lighting The overhead lighting can be turned on The brightness of the lighting can be and off independently of the fan. adjusted. ^ While the lighting is turned on, press and hold the joystick backwards or forwards. -
Page 13: Filter Timers
Operation Filter timers Checking the filter timers To check the percentage of time set Grease filter timer already used: A timer monitors the hours of operation. ^ Press the joystick to the left to turn The indicator for the grease filter will the fan on. -
Page 14: Reprogramming The Timers
Operation Reprogramming the timers The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40 or 50 hours. – A time of 20 hours should be programmed in kitchens with frequent pan or deep frying. –... - Page 15 Operation Reprogramming the charcoal filter timer The active charcoal filters can only be used in recirculation mode and cannot be used to exhaust fumes. The charcoal filter timer is not preset. Before using the hood in recirculation mode, the charcoal filter timer must be programmed.
-
Page 16: Cleaning And Care
Cleaning and care ,WARNING Avoid: TO REDUCE THE RISK OF – cleaning agents containing soda, FIRE, ELECTRIC SHOCK, OR acids or chlorides, INJURY TO PERSONS, – abrasive cleaning agents OBSERVE THE FOLLOWING: e.g. powder or cream cleansers, – abrasive sponges, e.g. pot scourers Before cleaning or servicing the or sponges which have been hood, disconnect it from the power... -
Page 17: Grease Filters
Use a wash program with a max. A dirty filter is a fire hazard. temperature of 150°F (65°C). In a Miele dishwasher use the "Normal" program. Use the recommended amount of dishwasher detergent. Overuse could destroy the filter. - Page 18 Cleaning and care Inserting the grease filters When putting the grease filters back make sure that the locking clips are visibly facing the cooking surface. If the filters are incorrectly installed, insert a small screwdriver into the slit along its edge to disengage it from the casing.
-
Page 19: Active Charcoal Filter
Cleaning and care Active charcoal filter DA 2280 uses 2 active charcoal filters DA 2210 uses 4 active charcoal filters In recirculation mode active charcoal filters must be used in addition to the grease filters. It is designed to absorb cooking odors. -
Page 20: Changing The Light Bulb
Cleaning and care Changing the light bulb ,WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before changing the light bulbs, disconnect the hood from the power supply, see "Important Safety Instructions". When in use halogen bulbs become extremely hot, and they can burn your hands. -
Page 21: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 23: Installation Instructions
Installation Instructions Read these instructions and the "Important Safety Instructions" before installing this ventilation system. The installation steps are described in the enclosed "Installation Diagram". Leave these instructions with the appliance for the consumer/user. Information is subject to change. Please refer to our website to obtain the most current product specification, technical &... -
Page 24: Caring For The Environment
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling center about the be biodegradable and recyclable. -
Page 25: Appliance Dimensions
Appliance dimensions DA 2280... - Page 26 Appliance dimensions DA 2210...
-
Page 27: Distance Between Cooktop And Hood (S)
Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: Miele Cooktops Non-Miele Cooktops Electric Cooktops 24"... -
Page 28: Installation
^ Holding the non-return flap at the wire, pull it out of the bracket. The DA 2280 is equipped with one, the DA 2210 with two non-return flaps. CAUTION To avoid risk of hand or other injury, avoid contact with sharp edges during the assembly and installation process. - Page 29 Preparation for air extraction information on installing the exhaust mode hose. ^ DA 2210: The hood has two vent collars for two 6" (150 mm) diameter exhaust hoses. The supplied Y- adapter can be used to feed the exhaust from both connections into an 8"...
-
Page 30: Recirculation Mode
It can be ordered from your Miele dealer or the Technical Service Dept. It contains a 6" (150 mm) diameter hose, a grille and a hose clamp to secure the hose at the exhaust connection of the hood. -
Page 31: Installing The Joystick
Installation Installing the joystick Joystick extension The joystick can be extended for an easier reach. ^ Place a spring washer between the joystick base and the extension. ^ Screw the spring into the socket and Tighten the extension by hand while tighten by hand. -
Page 32: Electrical Connection
Installation Electrical connection Before connecting the appliance to power read the "Important Safety Instructions". ^ Plug in the power cord. Before using the appliance remove the grease filters and remove the protective foil from the filter frame. Insert the grease filters back into place. -
Page 33: Air Extraction
Air extraction Exhaust ducting and connections WARNING Use smooth or flexible pipework made from approved non-flammable Danger of toxic fumes. materials for exhaust ducting. Gas cooking appliances release To achieve the most efficient air extraction and quietest noise levels, carbon monoxide that can be consider the following: harmful or fatal if inhaled. -
Page 34: Condensate Trap
Air extraction Condensate trap optional accessory – If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the In some cases, a condensate trap may flue. also be required to collect and evaporate any condensate which may Never connect an exhaust hood to occur. -
Page 35: Electrical Connection
Electrical Code. If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. See back cover for contact information. ,WARNING: THIS APPLIANCE MUST BE... -
Page 36: Technical Data
Circuit rating....15 A Weight DA 2280 ... 23.1 lb (10.5 kg) DA 2210 ... 35.3 lb (23.1 kg) - Page 40 Alteration rights reserved / 1711 M.-Nr. 07 773 240 / 02 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.