Miele DA 2250 User Manual
Hide thumbs
Also See for DA 2250:
- Operating and installation manual (40 pages) ,
- Operating and installation instructions (40 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele DA 2250
Summary of Contents for Miele DA 2250
- Page 1 Operating and installation instructions Cooker hood DA 2250, DA 2250 EXT DA 2270, DA 2270 EXT DA 2210 en - GB, AU To avoid the risk of accidents or damage to this appliance it is essential to read these instructions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Caring for the environment ......... . 3 Warning and Safety instructions . -
Page 3: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment. -
Page 4: Warning And Safety Instructions
Warning and Safety instructions This appliance is not intended for This appliance complies with all use by persons (including children) relevant local and national safety with reduced physical, sensory or requirements. Inappropriate use mental capabilities, or lack of can, however, lead to personal injury experience or knowledge, unless they and damage to property. -
Page 5: Technical Safety
Technical safety Installation, maintenance and repairs may only be carried out by a Before installation, check the cooker Miele authorised person in accordance hood for visible signs of damage. with current national and local safety Under no circumstances should you regulations. - Page 6 These models may only be combined with a Miele external motor. This appliance may only be used in mobile installations such as ships, caravans, aircraft etc. if a risk...
- Page 7 The Miele DSM 400 control module or by other technical measures, such offers the possibility of combining other as ensuring that the cooker hood can...
-
Page 8: Correct Use
Warning and Safety instructions Correct use Do not use the cooker hood without the filters in place. This way you will Never use an open flame beneath avoid the risk of grease and dirt getting the cooker hood. To avoid the danger into the appliance and hindering its of fire, do not flambé... - Page 9 Safety regulations prohibit the fitting of a cooker hood over solid fuel stoves. All ducting, pipework and fittings must be of non-flammable material. These can be obtained from the Miele Spare Parts department or from builders' merchants. The appliance must not be connected to a chimney or vent flue which is in use.
-
Page 10: Guide To The Appliance
Guide to the appliance... - Page 11 Special accessory for recirculation for the first time. mode The touch control is used to reset the DA 2250, DA 2270: 2 filters operating hours counter every time the DA 2210: 4 filters charcoal filters are replaced (see "Cleaning and care").
-
Page 12: Modes Of Operation
(2 on the DA 2250, DA appliance must be fitted in the exhaust 2270 and 4 on the DA 2210). The socket in the motor unit. -
Page 13: Operation
^ Press and hold the joystick to the left. connected to a window contact The power level indicator lamps will switch via the Miele DSM 400 control go out. module, then the fan cannot be switched on if the window is shut. -
Page 14: Automatic Switch-Off Of The Intensive Setting
Operation Run-on option Automatic switch-off of the Intensive setting It is advisable to run the fan for a few You can set the Intensive setting so that minutes after cooking has finished to it only runs for 10 minutes before neutralise any lingering odours in the air, whether you are using air extraction reverting automatically to level III. -
Page 15: To Switch The Hob Lighting On
Operation To switch the hob lighting on To switch the hob lighting off ^ Press the joystick again once to the The hob lighting can be switched on and off independently of the fan. rear or to the front to switch it off. Safety cut-out Should the cooker hood be left on, the fan will switch off automatically after 10... -
Page 16: Filter Operating Hours Counter
Operation Filter operating hours counter Reading the grease filter operating hours counter The number of hours the appliance has been in operation is stored in memory. To check the percentage of time set already used: The operating hours counter tells you ^ Switch the fan on with the joystick. - Page 17 Operation Altering the grease filter operating hours counter The operating hours counter for the grease filter is set at the factory for 30 hours. This can be lengthened or shortened to suit the type of cooking you do. You can choose 20, 30, 40 or 50 hours.
- Page 18 Operation Activating and altering the charcoal filter operating hours counter (in recirculation mode) The charcoal filters must be fitted for the cooker hood to be used in recirculation mode. On delivery, the operating hours counter for the charcoal filter is deactivated. For recirculation mode, the operating hours counter needs to be set to suit ^ Use the joystick to select the time...
- Page 19 Operation Resetting the charcoal filter Reading the charcoal filter operating operating hours counter hours counter To check the percentage of time set already used: ^ Switch the fan on with the joystick. The indicator lamp for the charcoal filter control will light up after the cooker hood has operated for the number of hours set.
-
Page 20: Cleaning And Care
The re-usable metal grease filters in the applicable). appliance remove solid particles (grease, dust, etc.) from the kitchen A range of Miele branded cleaning and vapours, preventing soiling of the conditioning agents are available to cooker hood. order through your Miele Dealer /... - Page 21 65°C programme, ensuring the spray arm is not obstructed. If a Miele dishwasher is being used, select the Sensor wash programme. ^ Use a mild dishwasher detergent.
-
Page 22: Fitting And Replacing The Charcoal Filters
They are designed to absorb cooking odours and are fitted in the canopy above the grease filters. DA 2250, DA 2270: 2 charcoal filters DA 2210: 4 charcoal filters New filters can be purchased from your Miele dealer or from the Miele Spare Parts Department. - Page 23 Cleaning and care Always replace the charcoal filters im- mediately if – the indicator lamp for the charcoal filter control lights up, – they are no longer effective in absorbing kitchen odours. They should, however, be replaced at least every 6 months. Used charcoal filters can be disposed of with the normal household waste.
-
Page 24: Changing A Halogen Lamp
Cleaning and care Changing a halogen lamp Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the mains supply. Ensure that: – it is switched off at the isolator, or – it is switched off at the wall socket and the plug removed, or –... -
Page 25: After Sales Service
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – Your Miele Dealer / Chartered Agent – The Miele Customer Contact Centre (see back cover for address). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. -
Page 26: Appliance Dimensions
Appliance dimensions... -
Page 27: Safety Distance Between Hob And Cooker Hood
– 650 mm above gas hobs and cookers If this cooker hood is installed above a Miele Wok CS 1028 CombiSet appliance, a minimum safety distance of 760 mm must be maintained between the burner and the lower edge of the cooker hood. -
Page 28: Installation
The flaps must open upwards. DA 2250, DA 2270: 1 non-return flap DA 2210: 2 non-return flaps Building in The cooker hood is designed for... -
Page 29: Preparation For Extraction
(see One conversion kit is required for the "Connection for air extraction"). DA 2250 and 2270, and two kits for the DA 2210. You will also require two charcoal filters for the DA 2250 and 2270, or 4 charcoal filters for the DA 2210 (see "Technical data"). - Page 30 Installation Fitting the joystick A non-return flap is not used in recirculation mode. ^ Take the on-site conditions into account when fitting the conversion kit. When fitting the exhaust grille make sure that the slats in the grille point towards the centre of the room and not directly towards a wall or the ceiling.
- Page 31 Joystick extension the external motor. The joystick can be extended if required (special accessory - Miele DBV 100). ^ Assemble the spring and top section as described above. ^ Connect the appliance to the mains via a fused spur or fused socket as appropriate.
-
Page 32: Connection For Air Extraction
Connection for air extraction – Only use smooth pipes or flexible Important: To avoid the danger of hoses made from non-flammable toxic fumes please observe the materials for extraction connection. Warning and Safety instructions. If the exhaust ducting is secured to This is especially crucial when using the exhaust stub by a hose clip, the cooker hood at the same time as... -
Page 33: Condensate Trap
Connection for air extraction Important: Cooker hoods designed for use with an external motor (...EXT models) have an If the exhaust ducting is to run through integrated condensate trap. rooms, ceiling space etc. where there may be great variations in temperature Silencer between the different areas, the problem of condensation will need to... -
Page 34: Electrical Connection
Electrical connection If the switch is not accessible after All electrical work should be installation (depending on country), an undertaken by a suitably qualified additional means of disconnection must and competent person in strict be provided for all poles. accordance with current national For extra safety it is advisable to protect and local safety regulations the appliance with a suitable residual... -
Page 35: Operation With Control Module Dsm 400
Operation with Control module DSM 400 The Miele DSM 400 control module can If the control module is be used to combine the cooker hood disconnected in order to operate the with other components. cooker hood without the window It enables the following: contact switch (e.g. -
Page 36: Connection To A Light Switch
Operation with Control module DSM 400 Connection to a light switch The control module can be used to switch on the cooker hood lighting and also to dim it, depending on model, via a light switch in the house. Installation The control module is fitted onto the cooker hood housing. -
Page 37: Technical Data
Recirculation with charcoal filter: DA 2250 ..... 8 kg DA 2250 EXT ....5.5 kg Level I . - Page 40 Alteration rights reserved / 4209 M.-Nr. 07 287 080 / 04...