Miele CVA 4085 Operating And Installation Manual page 9

This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
The machine is not suitable for
connection to a hot water supply.
This would cause damage.
The stopcock must be accessible
for servicing work after the coffee
machine has been built-in.
The protective sleeve of the water
inlet hose must not be damaged or
kinked. This will cause it to leak.
The integrated Waterproof system
offers protection from water
damage, provided the following
conditions are met:
– The machine is correctly installed
and plumbed in.
– The machine is properly maintained
and parts are replaced where it can
be seen that this is necessary.
– The stopcock is turned off when the
machine is not used for a longer
period of time (e.g. during holidays).
Warning and Safety instructions
Installation work and repairs may
only be carried out by suitably
qualified and competent persons in
accordance with current local and
national safety regulations. Repairs and
other work by unqualified persons
could be dangerous and the
manufacturer will not be held liable.
Ensure current is not supplied to the
machine until after installation,
maintenance or repair work has been
carried out.
The machine is only completely
isolated from the electricity supply
when:
– the mains fuse is withdrawn,
– or the screw-out fuse is removed (in
countries where this is applicable),
– it has been switched off at the wall
socket and the plug has been
withdrawn.
Never open the housing of the
machine. Tampering with electrical
connections or components and
mechanical parts is highly dangerous
to the user and can cause operational
faults or electric shock.
If the coffee machine is to be built
in above another appliance, there
must be a full-width, closed shelf
between them (except when it is
combined with a Miele built-in plate
warming drawer).
9