Display; Buzzer Tones - Miele CVA 4085 Operating And Installation Manual

Display

Buzzer tones

Settings: Customising your machine
You can adjust both the contrast and the brightness of the
display:
^ Touch the sensor beside "Settings".
Settings
ß Water hardness
ß User profile
ß Display
^ Touch the sensor beside "Display".
^ Touch the sensor beside Contrast or Brightness and set the
level with the middle sensor on th right or left of the display.
^ Touch the sensor beside "ok" to save the setting.
You can choose for an audible tone to sound each time a
sensor is touched.
^ Touch the sensor beside "Settings".
Settings
ß User profile
ß Display
ß Buzzer tones
^ Touch the sensor beside "Buzzer tones".
You can now choose whether you want an audible tone to
sound each time a sensor is touched (touch the sensor
beside "On") or not (touch the sensor besde "Off").
If you select "On", you can then set the volume. The higher
the number, the louder the audible tone.
47