Miele CVA 4085 Operating And Installation Manual page 75

. . . too much crema has formed and is overflowing above
the coffee spouts.
Some types of coffee will produce too much crema if the
coffee or espresso temperature is set to maximum and the
amount of coffee to be ground is set too high.
^ Set a lower temperature and reduce the amount of coffee to
be ground.
. . . the milk froth is "spitting".
Perhaps the system was not filled with water before the first
drink was made. Fill the system with water as described in
"Making coffee: Cappuccino and milk froth").
. . . milk spits out of the jug when making the first froth of
the day.
If the door was opened during the heating up phase,
pressure will have built up in the steam valve. When the valve
was opened, this pressure caused the milk to come out of the
cappuccino spout too fast.
. . . the slide control for the grinder setting will not move.
^ Close the machine door and dispense a cup of espresso
coffee.
The grinder setting slide control will now move.
. . . the brew unit cannot be removed.
The brew unit is not in the correct position.
^ Close the door and switch the machine on.
The brew unit will position itself correctly.
Problem solving guide
75