Step 2.
Specify the destination, network mask, and gateway or next hop for this route.
To create a route that defines the default gateway for your LAN, enter 0.0.0.0 in both the
Destination and Net Mask fields. Enter your ISP's IP address in the Gateway/NextHop field.
Note that you cannot specify the interface name, route type or route origin. These parameters
are used only for routes that are identified automatically as the Prestige communicates with
other routing devices. For routes you create, the routing table displays system default values in
these fields.
Step 3.
Click Submit to confirm your changes.
The IP Routing Table will now display the new route.
Step 4.
Follow the instructions in the section on Committing Your Changes and Rebooting the Prestige
to save your changes to permanent memory and make your changes take effect.
Configuring IP Routes
Prestige 623 Series Dual-link ADSL Router
Figure 6-3 IP Route: Add
6-5