Figure 18-2 Ipoa Interface: Add; Table 18-2 Ipoa Interface: Add - ZyXEL Communications Prestige 623 series User Manual

The following table describes the fields in this screen.
FIELD
IPoA Interface
Conf. IP Address
Interface Sec Type
Netmask
RFC 1577
Use DHCP
Default Route
Gateway IP Address
Click Submit to confirm your changes. Refer to the section on Committing Your Changes and Rebooting the
Prestige to save your changes to permanent memory and make your changes take effect.
Configuring IPoA Interfaces

Figure 18-2 IPoA Interface: Add

Table 18-2 IPoA Interface: Add

Select a pre-defined interface from the drop—down list menu.
Enter the IP address to assign to the IPoA interface.
Select the security type from the drop-down list menu to assign to the IPoA
interface.
Enter the subnet mask for the IPoA interface.
Select Yes to configure the IPoA interface as type RFC 1577 to support multiple
VC.
Select Enable to use the DHCP server from the ISP.
Select Enable to use a default route.
Enter the IP address of the gateway device.
Prestige 623 Series Dual-link ADSL Router
DESCRIPTION
18-3