Table 4-1 Lan Configuration - ZyXEL Communications Prestige 623 series User Manual

FIELD
LAN Configuration
Set the fields below to configure the LAN port on the Prestige.
System Mode
Get LAN Address
LAN IP Address
LAN Network Mask
IGMP
USB Configuration
Set the fields below to configure the USB port on the Prestige.
USB IP Address
USB Network Mask
IGMP
Click Submit to confirm your changes. Refer to the section on Committing Your Changes and Rebooting the
Prestige to save your changes to permanent memory and make your changes take effect.
Setting the LAN IP Address

Table 4-1 LAN Configuration

This field displays the pre-configured mode for the Prestige. This field is read-only.
To specify a static IP address to the LAN port, select Manual and enter an IP
address in the IP Address field.
To accept a dynamic IP address from your ISP's DHCP server, select External
DHCP Server.
To accept a dynamic IP address from a DHCP server on your network, select
Internal DHCP Server.
Enter an IP address if you select Manual in the Get LAN Address field.
This is the IP address your computers use to identify the LAN port of the Prestige.
The public IP address assigned to you by your ISP is NOT your LAN IP address.
The public IP address identifies the WAN (ADSL) port on your ADSL/Ethernet
router to the Internet.
Enter the subnet mask that identifies which parts of the LAN IP address refer to
your network as a whole and which parts refer to specific nodes on the network.
Select Enable to activate IGMP on the LAN port. Otherwise, select Disable.
Specify the IP address for the USB port on the Prestige.
If you changed the USB IP address through USB connection, then the connection
will be terminated.
Specify the subnet mask for the USB port on the Prestige. If necessary, change
the IP address of the computer's USB port to be in the same subnet of the
Prestige's USB port.
Select Enable to activate IGMP on the USB port. Otherwise, select Disable.
Prestige 623 Series Dual-link ADSL Router
DESCRIPTION
4-3