Fiery EX12 Printing Manual page 87

6
6-13 Using the Fiery Bar Scan application
—Choose ADF or Platen.
Source
—Choose the number of sides the copier/printer must scan.
Sides
(This option is only available if you are scanning from the document feeder.)
—Choose the size of the document the Fiery scans.
Size
(This option is only available if you are scanning from the copier glass.)
—Choose a value for the resolution. Changing the resolution also changes
Resolution
the image size. The maximum resolution supported by the Fiery appears in the
dialog box.
(
Color Mode
3. Choose the appropriate settings and click Send.
To save the file to a specific destination, see
destination"
T S F
O RETRIEVE A CAN ILE USING THE
1. Start the Fiery Bar Scan application from the Fiery Bar by right-clicking the
application on the Fiery Advanced Controller Interface and selecting Scan.
2. Click the Retrieve tab.
or )—Choose the type of scan you want.
Color Grayscale
on page 6-5.
F B S
IERY AR CAN APPLICATION
"Sending a scan job to a specific