Fiery EX12 Printing Manual page 43

2
2-5 Printing from applications
Enter the name specified for your group. The Group Name is assigned by the
Fiery Administrator.
Enter the Group Password specified for your group. This is assigned by the Fiery
Administrator.
The Administrator or Operator can edit the group name and group password from the
Command WorkStation Properties window.
The information you enter in the Notes areas can be viewed by the operator at the
Command WorkStation and also appears in the Job Log. It cannot be edited or erased
by the operator.
In the Instructions area, enter instructions to the operator about the job. These
instructions can be displayed in Command WorkStation, but do not appear in the Job
Log. These instructions can be edited by the operator.
Group Name and Group Password options are not available when printing to
N :
OTE
Direct connection.
For more information on Command Workstation overrides, see the
Job Management Guide.
7. Choose Printer Specific Options and specify the appropriate settings for your print job.
Fiery EX12
Choose Printer Specific Options