Fiery EX12 Printing Manual page 19

1
1-7 Printing from applications
7. Enter the Group Name, Group Password, and text in the Notes area.
Enter user and job identification information for managing purposes, or whatever
information is required at your site.
The Administrator or Operator can edit the Group Name and Group Password from
the Command WorkStation Properties window.
The information you enter in the Notes field can be viewed by the operator at
Command WorkStation and also appears in the Job Log. It cannot be edited or
deleted by the operator.
Group Name and Group Password options are not available when printing to
N :
OTE
the Direct connection.
8. In the Instructions area, enter instructions to the operator about the job and click OK.
These instructions can be displayed in Command WorkStation, but do not appear in
the Job Log. These instructions can be edited by the operator.
9. Click the remaining print option bars to specify the appropriate settings for the print
job and click OK.
These print options are specific to the Fiery and the copier/printer. They override
settings specified in Fiery Printer Setup, but can be overridden from the job
management tools.
The term "job management tools" is used in this manual to refer to Command
N :
OTE
WorkStation, Fiery Spooler, and Fiery WebSpooler.
For information about these options and overrides, see
For information on configuring installable options, see the
Installation Guide.
For more information about job management tools, see the
If you choose Printer's default, the job prints according to the settings specified in
Setup. For more information, see
If you specify incompatible print settings, the Conflict dialog box provides
N :
OTE
instructions to resolve the conflict.
10. From your application, click OK.
Select the Fiery as your current copier/printer.
11. Click OK.
Appendix
User Software
Job Management
Appendix A.
A.
Guide.