Fiery EX12 Printing Manual page 121

10
10-3 Printing using an E-mail Client
4. Attach the file you want to print in the body of the e-mail.
You can enter a additional text in the body of the message, if necessary. The text will
also be printed.
N
OTE
administrator, the e-mail will not be sent.
5. Send the e-mail.
The file is sent to the Fiery and the job is printed. After the Fiery receives the job, you
receive an e-mail notification that the print job was accepted. The e-mail also provides
a job identification (ID). You can use the job IDs to manage jobs with Job Control (see
the following section). The e-mail notification indicates any current error at the
copier/printer.
Once the job has been printed, you will receive a second e-mail notification that
indicates the job printed successfully.
To check the status of your job, follow the instructions in the following section.
If your attachment exceeds the file size limitation set by your e-mail system
: