5
5-10 Printing Variable Data Documents
4. Print the variable document to the Fiery with the Use Master print option set to the
appropriate FreeForm master number.
The FreeForm master number may be one you set when you sent the master
document, or it may be one that was assigned by the operator.
FreeForm master numbers can be overridden from Command WorkStation,
Fiery Spooler, or Fiery WebSpooler. Check with the operator to make sure that the
FreeForm master number you specify is the correct one for the FreeForm master you
want to use.
If you want to check the job before it prints, instruct the operator to RIP and Hold the
job so you can preview it from Command WorkStation, Fiery Spooler, or
Fiery WebSpooler.
The following example shows the FreeForm master and variable document combined.
The variable data is simply overlaid on the master document.