Upgrade Firmware - ActionTec R1524SU User Manual

Upgrade Firmware

Selecting Upgrade Firmware in the "Utilities" screen generates the "Upgrade
Firmware" screen. Actiontec periodically posts firmware upgrades to enhance the
Gateway's capabilities.
Windows Computer
If the Gateway is connected to a computer running Windows OS:
1. Click Upgrade Here in the Upgrade Firmware screen and download the
upgrade files to the hard drive of the computer.
2. Double-click on the upgrade file (upgrade.exe).
3. Click Start. The upgrade process begins.
Warning: Do not unplug the power cord from the Gateway
during the Upgrade Firmware process. Doing so may result in
permanent damage to the Gateway.
4. After the upgrade is complete, unplug the power cord from the Gateway, then
plug it back in again.
5. When the Power Light stops flashing and glows steadily green, the Gateway is
fully operational.
6. Reconfigure the Gateway settings.
Non-Windows Computer
If the Gateway is connected to a computer running an operating system other than
Windows:
1. Click here (at the end of the phrase "...please click here") in the Upgrade
Firmware window.
Chapter 7 Using Utilities
77