Table of Contents
Advertisement
Actiontec Wireless-Ready DSL Gateway User Manual
Additionally, the "IP Address" entry should be on the
"x" defining a range from
If the Ethernet adapter is showing an incorrect IP address, click Release, which
sets all values back to 0 (zero). Then, click Renew (this process may take a few
seconds). The renewed IP address should be on the
If an error occurs, or the IP address renews with an address outside the
network, contact the ISP immediately
192.168.0.X
If running Windows
Start, Run, enter
in the"Open" text box, then press OK. A "
ing cursor (prompt). Enter
ipconfig
at the prompt, then press Enter on the keyboard.
The IP address of the Ethernet adapter should appear in the
Ensure the
address in the
IP
from
though
).
2
255
If the Ethernet adapter is showing an incorrect
ipconfig/release
at the prompt, then press Enter on the keyboard, which sets all values back
to 0 (zero). Next, enter
ipconfig/renew
at the prompt, then press Enter on the keyboard (this process may take a few
seconds). The renewed
If an error occurs, or the
network, contact the
192.168.0.X
Ensure the browser is not set to "Never dial a connection" and there are no
previous
settings.
LAN
To check this, go to Start, Settings, Control Panel. In the Control Panel,
double-click Internet Options. When the "Internet Properties" window
appears, ensure that the "Never dial a connection" option is not activated,
then click
Settings. When the "Local Area Network (
LAN
window appears, ensure that no settings are activated. If there are settings
activated, deactivate them.
Shutdown and restart the computer. After the computer restarts, unplug the
power cord from the Gateway and plug it back in. When the lights glow
solid green, try accessing the Internet.
though
).
2
255
or Me, check the computer's
98 SE
CMD
192.168.0.X
address should be on the
IP
address renews with an address outside the
IP
immediately
ISP
94
192.168.0.X
192.168.0.X
TCP/IP
" window appears, with a blink-
DOS
network (with "x" defining a range
address, enter
IP
192.168.0.X
LAN
network (with
network.
settings. Select
window.
DOS
network.
) Settings"
Advertisement
Table of Contents
