Table of Contents
Advertisement
Chapter 8 Configuring the Gateway's Utilities
Restore Default Settings
To restore the Gateway to its factory default settings, select Restore Default Settings
Restore Default Settings
and the factory default settings restored. During this process, the Gateway's Power
flashes and the Gateway is disabled.
light
"
Warning: Do not unplug the Power cord from the Gateway
during the Restore Default Settings process. Doing so may result
in permanent damage to the Gateway.
When the Power Light stops flashing and glows steadily green, the Gateway is fully
operational.
Upgrade Firmware
Selecting Upgrade Firmware in the Utilities screen generates the "Upgrade
firmware.
63
- Quick Links:
- Performing a Quick Setup
Hide quick links:
Advertisement
Table of Contents
