Table of Contents
Advertisement
The values in the "LAN IP Address" and "Netmask" text boxes are the IP address
and Subnetmask of the Gateway as seen on the network. These values can be mod-
ified for your LAN network, but Actiontec recommends keeping the default factory
settings (IP Address192.168.0.1 Subnetmask 255.255.255.0).
Gateway's
Address is modified, verify the
LAN IP
same subnet. For more information, see "
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
DHCP Server
Selecting
Server in the "Advanced Configuration" screen generates the
DHCP
"
Server" screen. The Gateway has a built-in
DHCP
Configuration Protocol) server that automatically assigns a different
each computer on the network, eliminating
The factory default setting is On. To disable the
Actiontec strongly recommends leaving the
Server option is Off, ensure the
the same subnet as the
"
Server Configuration."
DHCP
Chapter 6 Advanced Setup
DHCP
addresses of the networked computers are on
IP
address of the Gateway. For more information, see
IP
61
Server range is within the
DHCP
Server Configuration."
(Dynamic Host
DHCP
address conflicts.
IP
Server, select Off.
DHCP
Server option On. If the
DHCP
Note: If the
address to
IP
DHCP
Advertisement
Table of Contents
