Table of Contents
Advertisement
Chapter 5 Static IP Address on the Gateway
11. Once the Gateway restarts, return to the Setup/Configuration screen and
select Change Admin Password from the menu on the left side.
12. The "Change Admin Password" screen appears. Enter a new password in the
"New Password" text box, and re-enter the password in the "Re-enter New
Password" text box. Make sure to write this password down and keep it in a
secure location. The password will be needed to access to the Gateway's Web
setup screens.
13. Click "Save and Restart" at the bottom of the screen.
14. The "Save and Restart" page appears. Click "Save and Restart" to save the set-
tings changed in the Change Admin Password screen.
The Gateway has been configured to support a block of static
the Power light stops blinking, the Gateway is ready for use.
49
addresses. Once
IP
Advertisement
Table of Contents
